Controlling the Thermostat on Control4 OS 3

Note: Make sure you are in the Room where you want to set up climate control

Step 1: Tap the 'Comfort' icon on the Room view; this will open the 'Thermostat' screen

  • On the navigation bar at the top, there are four functions:
    1. Temperature
    2. Humidity
    3. Schedule
    4. Extras

Temperature page includes:

  • The temperature dial that shows the current temperature and the set temperature
  • The set temperature can be changed by moving it along the dial or by using the up/down arrows
  • The smaller number above and to the left of the main dial indicates the outside temperature
  • The smaller number above and to the right of the main dial indicates the outside humidity
  • The mode button allows us to set HVAC at Off, Cool, Heat, or both Cool/Heat using the Auto option
  • The fan button allows us to control what the fan is doing. The settings are:
    • On: Fan runs constantly
    • Auto: Fan runs only when the heating or cooling is on
    • Circulate: Fan will run intermittently between heating and cooling cycles
  • The Presets button are determined energy saving heating and cooling schedules based on occupancy and time of day
  • The Hold button allows the suspension of heating and cooling events
    • 2 Hours: Override the schedule temporarily for two hours and then return to regular schedule
    • Next Event: Overrides the schedule until the next scheduled event
    • Permanent: Suspend the schedule indefinitely
    • Hold Until: Allows the selection of date and time for schedule to resume

Humidity tab

  • Main dial shows humidity level in selected room

Schedule tab

Extras tab

  • Temperature Scale allows Fahrenheit or Celsius to be selected

See video to take you through step by step instructions.